Analyzing the damage to the laptop requires foresight and patience. Do not rush to decide before making a check the overall condition of your laptop. Here are some laptop problems that often occur:
Dead or Power Failure
For the case of death that you should check first is your laptop batery. The possibility of your laptop batery runs out completely. Try to recharge and wait for approximately 1 / 2 hours. Another cause is the laptop adapter is not functioning. You can check the indicator light illuminates when carger in laptop adapter laptop in love. If the indicator light does not glow, there is the possibility of a faulty adapter or power connector board boardyang laptop is damaged or defective. Another possibility board totally dead laptop laptop causing the total dead at all.
Power light the flame but the LCD screen does not display images.
Please check with installing an external monitor on the VGA port on your laptop. Then turn on your laptop, if the laptop is still dead, the possibility of damage is VGA, processor, mainboard, the BIOS IC, or RAM, a dirty or damaged. Try performing the checks one by one.
And if the external monitor and perform live with a normal image, the possibility of damage on the LCD inverters, LCD flexible cable, or LCD monitor. If there is damage on the LCD screen, then you have to replace the LCD screen, because the LCD screen can not be repaired.
Laptop Cooling Problems
Common problems faced by users of the laptop is often a hot issue, however, heat is the main enemy of the laptop, almost 75% of damage caused by overheating laptop. Especially in the casing of the laptop is almost no empty space is filled with all the components. The problem that often arises this section is a sewer blockage heat on the heatsink as it is covered by dust. This causes heat to be released back into the laptop. As a result, the temperature inside the laptop up from the seharusanya allowed. This can cause over heating in the VGA chip, Processor, and other components of the laptop mainboard.
Ports and Connectors Power Problems
This problem is also common. This is caused by a breakdown of the existing solder on the connector or port. Solder cracking caused by heat and age of the laptop itself. The solution is to re-solder on the solder developing cracks.
Hopefully useful!
by:irsyad fahmi alhanafi adfha